The chemical profile of active fraction of Kalimeris indica and its quantitative analysis

Kalimeris indica (L) Sch-Bip is a medicinal plant used by the Miao ethnic group in the Guizhou province of China. It is widely used as a fresh vegetable to treat colds, diarrhea and gastric ulcers. However, few studies have been conducted on the mechanism of its effect on colds, and its quality control. The anticomplement and antitussive activities of different polar extracts of K. indica were evaluated. Fifty-nine compounds, mainly including phenols and flavonoids, were identified in K. indica extract by ultra-high-performance liquid chromatography quadrupole time-of-flight tandem mass spectrometry. A method was established through ultra-high-performance liquid chromatography with a photodiode array to simultaneously determine the anticomplement and antitussive activity of five compounds in K. indica combining chemical identification with chemometrics for discrimination and quality assessment. Also, 3,5-dicaffeoylquinic acid and 4,5-dicaffeoylquinic acid exhibited significantly higher anticomplementary activity than the other three compounds. The quantitative data were further analyzed by principal component analysis and orthogonal partial least-squares discriminant analysis. Heatmap visualization was conducted to clarify the distribution of the major compounds in different geographical origins. Screening pharmacological activities by a combination of chemometrics and chemical identification might be an effective method for the quality control of K. indica.     

An improved LC–MS/MS method for determination of docetaxel and its application to population pharmacokinetic study in Chinese cancer patients

Because of its unpredictable side effects and efficacy, the anticancer drug docetaxel (DTX) requires improved characterisation of its pharmacokinetic profiles through population pharmacokinetic studies. A sensitive and rugged LC–MS/MS method for the detection of DTX in human plasma was developed and optimised using paclitaxel as an internal standard (IS). The plasma samples underwent rapid extraction using hybrid solid-phase extraction-protein precipitation. The analyte and IS were separated with an isocratic system on a Zorbax Eclipse Plus C₁₈ column using water containing 0.05% acetic acid along with 20 μM of sodium acetate and methanol (30/70, v/v) as the mobile phase. Quantification was performed using a triple quadrupole mass spectrometer through multiple reaction monitoring in positive mode, using the m/z 830.3 → 548.8 and m/z 876.3 → 307.7 transitions for DTX and paclitaxel, respectively. The range of the calibration curve was 1–500 ng/mL for DTX, and the linear correlation coefficient was >0.99. The accuracies ranged from −4.6 to 4.2%, and the precision was no higher than 7.0% for the analytes. No significant matrix effect was observed. Both DTX and the IS showed considerable recovery. This method was finally applied to the establishment of a population pharmacokinetic model to optimise the clinical use of DTX.     

Qualitative and quantitative analysis of phenolic acid glycosides in Ginkgo biloba L. leaf,G. biloba leaf extract and its injection

Ginkgo biloba L. leaf (GBL) is one of the most commonly used medicinal plants in the world. Phenolic acids with biological activities have a relatively high content in G. biloba leaf extracts (GBE); therefore they are of great significance for the quality control of GBL, GBE and its preparations. However, there have been few studies focused on their analysis. In this work, 12 phenolic acids, including 11 phenolic acid glycosides, were identified by liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC–Q-TOF/MS). Then, a method combining enzymolysis with HPLC was established for quantification of phenolic acid glycosides. It was found that the aglycones of phenolic acid glycosides mainly comprised five phenolic acids: 2,4,6-trihydroxybenzoic acid, protocatechuic acid, p-hydroxybenzoic acid, vanillic acid and p-coumaric acid. The quantitative method was validated, and the correlation coefficient (0.9993–0.9999), recovery (≥88.4%), repeatability (≤0.8%), and inter-day precision (≤5.5%) were satisfactory. Finally, the contents of glycosides of five phenolic acids in GBL, GBE and GBE injection from different sources were determined by the developed method. The method was accurate, repeatable and practicable, which could be helpful for the quantification of phenolic acid glycosides in other products containing GBL or GBE.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

中红外激光陶瓷的研究进展与展望

波段为2～5tμm的中红外激光在国防、医疗、通信等方面有着特殊的重要应用,而直接产生中红外激光的增益介质主要包括气体激光介质、半导体、稀土离子或者过渡金属离子掺杂的化合物.本文首先介绍应用于中红外波段的发光离子(包括Tm3,Ho3+,Er3+等稀土离子和Cr2+,Fe2等过渡金属离子)光谱特性,然后重点介绍氧化物(包括石榴石和倍半氧化物)和Ⅱ-Ⅵ族化合物(主要是ZnS/ZnSe)两大类中红外激光陶瓷材料的制备与激光性能.最后,对这两大类中红外激光陶瓷中存在的问题进行了分析,并对其发展方向进行了展望.     

Palladium‐Catalyzed Electrophilic Functionalization of Pyridine Derivatives through Phosphonium Salts

Herein, we report a highly efficient and practical method for pyridine‐derived heterobiaryl synthesis through palladium‐catalyzed electrophilic functionalization of easily available pyridine‐derived quaternary phosphonium salts. The nice generality of this reaction was goes beyond arylation, enabling facile incorporation of diverse carbon‐based fragments, including alkenyl, alkynyl, and also allyl fragments, onto the pyridine core. Notably, the silver salt additive is revealed to be of vital importance for the success of this transformation and its pivotal role as transmetallation mediator, which guarantees a smooth transfer of pyridyl group to palladium intermediate, is also described.     

通过超宽139La固体核磁共振波谱研究层状La(OH)2NO3

层状稀土氢氧化物是一类新型的稀土功能材料，本文采用固体核磁共振（SSNMR）方法研究了同时具备离子交换能力和非线性光学特性的层状La（OH）₂NO₃化合物，探讨了通过四极核CPMG（QCPMG）脉冲序列和变频谱图采集获取超宽¹³⁹La SSNMR谱图的方法，并描述了适用于此类实验的滤波方程和谱图重建方法.重建谱图同时包含四极核中心跃迁和卫星跃迁信息，本文使用QUEST软件对超宽¹³⁹La NMR谱图进行了模拟，获取的四极耦合常数C_Q和非对称因子η_Q均与CASTEP密度泛函理论计算值高度吻合.SSNMR实验结果证实层状La（OH）₂NO₃化合物属于非中心对称结构（P2₁），解决了对其结构长期以来存在的争论.     

超空泡射弹水下侵彻靶板三相耦合数值模拟

超空泡射弹侵彻问题的实质是特殊水下结构受到高速冲击载荷作用下的动态响应。对12.7 mm口径超空泡射弹侵彻典型水下目标壳体的毁伤效果开展研究,基于LS-DYNA有限元分析软件建立水环境中超空泡射弹垂直侵彻曲面靶板的等效模型,探讨射弹侵彻过程中动能侵彻和气泡溃灭对靶板联合毁伤效果,获得了靶板在各阶段的应力变化和结构变形规律。结果表明:侵彻靶板前,射弹着靶速度为200 m/s时的头部表面水介质压力峰值达768 N,靶板表面有明显下凹变形;侵彻靶板时,伴随着射弹动能侵彻和气泡溃灭冲击,水介质造成的影响不足动能侵彻的2%;侵彻靶板后,在靶板正面形成峰值速度为42 m/s的水射流进一步作用于破口;靶板整体弯曲变形,在200~300 m/s范围内,随着射弹着靶速度的增加,靶板弯曲形变量减小;靶板局部发生延性穿孔,射弹在水环境中具有更好的破口效果,射弹速度变化对破口尺寸影响不大。     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。